Summary:We often encounter arc lighters in our lives. Which is better, arc lighters or heating wire lighters...
We often encounter
arc lighters in our lives. Which is better, arc lighters or heating wire lighters? How should we choose these two arc lighters? Let's discuss which one is better, the arc lighter or the heating wire lighter!
Arc lighters are better, the first is the heating wire heating ignition, the other is the arc ignition. If your lighter has a heating wire, you only need a little power to ignite the heating wire to heat up. The problem that the heating wire does not turn red when you turn on the switch is either a bad battery or a problem with the charging device that prevents it from being charged. If your lighter is the latter, an arc lighter, then this lighter must be charged to a certain extent before it can generate an arc. If the charging is not in place, it is not enough, and the arc is directly used to ignite. There is no open flame in the rechargeable lighter, and the heating wire is the one that burns the heating wire to red smoke and touches the heating wire to ignite. The kind of arc is to generate electric charge, constantly shoot out sparks, and use this spark to ignite smoke. In addition, if you look at it more, it means that you may have never used such a lighter, whether there is any safety switch or something, and some lighters will not ignite when the safety switch is not turned on.
A piece of piezoelectric material block (crystal structure) is connected to one end of a thin wire, which forms a gap with the metal material at the outlet of the lighter, and the impact of the impact block is synchronized with the opening of the gas source through the mechanical mechanism. When the impact block hits the other end of the piezoelectric material block with a certain impact energy or force, the internal molecules of the piezoelectric material will vibrate strongly, and the vibration energy will be transmitted to the wire. Because the ratio of the cross-sectional area of the wire to the cross-sectional area of the piezoelectric material block is very large, the vibration of the molecules in the wire has a great tendency to strengthen.
