Summary:Flint steel wheel lighter: The steel wheel is made of special steel with teeth on the outer peripher...
Flint steel wheel lighter: The steel wheel is made of special steel with teeth on the outer periphery; the flint is made of low temperature alloy, the ignition point is around 160 ℃, and the calorific value is large. The flint is pressed against the surface of the steel wheel by the spring, and is heated by the friction of the steel wheel during operation, resulting in an ignition fire. This lighter is not as brisk in operation as other lighters, but produces more sparks and a higher ignition rate.
Piezoelectric ceramic lighters: Piezoelectric ceramic elements are installed in the ignition mechanism. Under the action of mechanical stress, piezoelectric ceramics are polarized due to the relative displacement of the internal positive and negative charge centers, resulting in the appearance of bound charges with opposite signs on the surfaces of the two ends of the material. Therefore, when the piezoelectric ceramic element is subjected to impact pressure, the mechanical energy is converted into electrical energy, and an instantaneous high-voltage spark is released at the tip to ignite the fuel.
Magnetic induction lighters have a magnetoelectric converter inside. During operation, the magnet and the coil move relative to each other, change the magnetic flux, generate a discharge voltage, generate sparks between the electrode air gaps, and ignite the gas.
Battery lighters: use integrated circuit batteries or ordinary batteries as energy sources. When the circuit of the capacitor and the transformer is turned on, a high-voltage spark is generated, igniting the gas.
Solar lighter: After being irradiated by sunlight or other light, its photocell converts light energy into electrical energy and charges it into the battery. When in use, the battery charges the capacitor, and the booster coil instantly generates a high anti-electromotive force, which releases an electric spark between the insulating diodes and ignites the gas.
Microcomputer lighter: The lighter is equipped with a battery-powered microcomputer, and the integrated circuit of the microcomputer has an automatic circulation system. When operating, make the circuit open to fire. Once the flame is extinguished by the wind, it will automatically re-burn.
Gas lighter: its standard pressure is 24 degrees Celsius, more than 104kpa.
Post-mix lighters: These gaseous lighters burn by mixing air and fuel after ignition.
Pre-mixed lighter: The fuel gas of this type of gas lighter is mixed with air and then burned.
Disposable lighters: These lighters are filled with fuel and cannot be refilled.
Refillable lighters: These lighters can be refilled with an external gas tank or inserted into a new fuel tank.
Adjustable lighters: These lighters offer a mechanism to freely adjust the flame height.
Self-adjustable pipe lighters: These lighters provide a device that automatically raises the flame height from upright to tilted.
The setting is specially designed for pipes.
Tricky lighters: This type of lighter is mainly for his entertainment, such as a prank lighter with an electric person function. Through creativity, designers can design many varieties of such lighters, which are usually used as gifts for people.