Do you know this knowledge about lighters?

First: A lighter is a lighter, not a toy!
First, when many friends get gas lighters, the first action is to open the test fire. In fact, the correct way is to hold the lighter in your hand for at least 30 seconds. Hold for a while to let the process of liquid vaporization reduce the adverse effects of temperature difference, so the ignition will be smoother; secondly, do not continue to repeatedly ignite, lighters are not toys, gas machine ignition requires a process, repeated ignition not only seriously affects Mechanical life, and will deform the spring mechanism at the same time, the reason is the same as you repeatedly bend a wire.

Second: lighters are consumables, pay attention to maintenance!
The flint gas lighter needs to clean the ignition port regularly, because the dust after the flint friction will fall around the ignition port, and the ignition port of most gas machines is very fragile, once it is blocked, it can only be repaired; in addition, the gas machine ignition The mouth must not be cleaned with liquid! In addition, silver-plated or silver-coated machines can be wiped with a silver-wiping cloth or silver-washing water, and most 80% new machines will become more than 95% new after wiping.

Third: Don't try to fix it yourself!
The structure of the gas engine is very complicated, especially the many springs and hairsprings inside cannot be reassembled after disassembly without special tools due to space and hardness problems!

Fourth: Adjust the temperature flame to strictly refer to the manual!
Many friends will often adjust the flame after they get the machine. This is the most undesirable way. Once the flame is adjusted, do not move it easily. During the adjustment process, you must pay attention to the points in the manual, and it cannot exceed 10 degrees at a time. Here is a special reminder , After some adjustment devices exceed 90 degrees, the machine will be scrapped!

Fifth: Be sure to use clean gas!
It is recommended to use a special gas cylinder here. Although the monopoly also sells counterfeit goods, it is generally guaranteed in big cities. If you want to use an ordinary gas cylinder to inflate, you must choose a clean one. The simple method is to depress the gas cylinder before inflating. Click, if there is no smell, it means the gas is good, here is a special reminder, you can't smell it right through your nose!

Sixth: Do not direct the lighter to the eyes and body!
The direct lighter has a pressurized device, which can cause burns to the eyes or body!

Seventh: Do not put the gas machine in direct sunlight!
The result of direct exposure is not an explosion, but a large amount of mixed gas in the trachea. The moment you ignite, the gas will break through the seal, causing the seal to fail and cause permanent leakage!



HOME PLASTIC+METAL ELECTRONIC LIGHTER OQ-833